BEHLEN . PUMICE Stone
(Powdered Finish Rubbing Abrassive)

Product Label Text
2F - Medium - B720-1402
4F - Fine - B720-1402

H. Behlen Pumice Stone
is made from natural lava rock and is non-toxic.

Use a filter mask to avoid breathing of dust particles.
Use goggles to protect against eye irritation.

DIRECTIONS:
1 - Sand with the grain using P800A Silicone Carbide Waterproof sandpaper, using Paraffin Oil, Wool-Lube, or water as a lubricant.

2 - Follow using P1200A grit in the same manner.
Clean the surface with a soft rag.

3 - Sprinkle a thin coat of 2F Pumice Stone on the finish along with several drops of Behlen Paraffin Oil to create a paste.

4 - Using a felt block or soft cloth, rub the mixture in long strokes with the grain.

5 - Once a uniform sheen is developed, clean the surface with a soft rag.

• • • • •

KEEP OUT of REACH of CHILDREN
Avoid Contact with Eyes



 


6 - Repeat steps 3-5 using 4F (Fine) Pumice Stone.

7 - Next, (for a Gloss sheen) repeat steps 3-5 using Rottenstone.

8 - Apply wax or polish as desired to protect the finish.

Behlen Blue Label Paste Wax or Oz Polish will add to the luster.

Additional Notes:

Rub only on fully cured finishes:
Follow coating manufacturer’s dry time when rubbing new finishes.

A more agresive cutting action will result when Wool-Lube is mixed with water.

For Best Results when rubbing out a finish, make sure the finish is fully cured and not just dry.
Most air dry finishes need a full 21-30 days under good conditions to achieve maximun cure and hardness. The harder the finish the more predictable and consistant the result.
Back To: Finish Rubbing, Polishing, Deluxing & Finish Care
Back To: Product Label Text & Info. Index

Shellac.net Wood Finish Supply

To: BEHLEN Index Page . rev.1/5/14 . Home: Shellac.net