Aerosols, Perfect Blend WATERBORNE LACQUERS
Perfect Blend WATERBORNE LACQUERS - Close Out
 Perfect Blend is a water-based acrylic lacquer featuring fast dry
and very low odor that is HAPS free. It displays excellent adhesion
over waxed and polished surfaces and areas contaminated with silicone.
Perfect Blend® Waterborne Lacquer features a soft spray, low film build,
and fine atomization resulting in virtually no overspray, little bounce-back,
good flow-out, and a strong ability to blend in with the surrounding surface.
Ideal for touch-ups where odor may be an issue,
especially restaurants, offices, homes and hotels
• Soft spray and fine atomization.
• Virtually no over-spray, little bounce and excellent flow out
• Superior blend with surrounding area, no touch-up halo effect
• Excellent adhesion over waxed and polished surfaces.
- Net Wt. 13.5 oz
|
SealCoat Universal Sanding SEALER (Shellac) UPS Ground Only
Click above for Product Data
SealCoat™ Universal Sanding Sealer
 SealCoat offers the time-saving versatility of a
refined Dewaxed Shellac in a pre-mixed 2 lb. cut 100% wax-free formula.
It’s the perfect sanding sealer because it penetrates the surface, dries quickly,
gives a rich tone to wood surfaces and since it contains no waxes or stearates.
SealCoat is guaranteed to be compatible with oil-base polyurethanes,
acrylic finishes, lacquers, catalyzed finishes, and varnishes.
SealCoat™ won't raise the grain and dries quickly.
|
E-Z VINYL Lacquer SEALERS - CLEAR, BLACK & WHITE UPS Ground Only
Click link above for Data Sheet
E-Z VINYL LACQUER SEALERS - CLEAR, BLACK & WHITE
VINYL SEALERS develop an excellent moisture resistant barrier for the wood substrate, and provides a good tough, and flexible base for all lacquer finishes.
Vinyl Sealer is offered in a ready to use formulation
that needs no further reduction or catalyst.
• • • 5 Gallon Pails available on Order. Please Phone to order.
Note: Vinyl Sealer may be applied over raw wood or filled and stained substrates.
Clear also available for Aerosol applications
|
CLASSIC Stringed INSTRUMENT LACQUER UPS Ground Only
Click above: Label Text & Application Information
CLASSIC Stringed INSTRUMENT Lacquer
Classic Stringed Instrument Lacquer is a high quality
nitrocellulose lacquer specifically designed for wooden stringed instruments.
Stringed Instrument Lacquer allows for the special expansion and contraction
that occurs due to the unique construction of stringed instruments.
Note:
Stringed Instrument Lacquer must be applied over our Vinyl Sealer in order
to assure its unique film building and special finish characteristics.
Also available in Aerosol
|
|
|
Finishers Choice LACQUER SANDING SEALER UPS Only
Finisher's Choice™ LACQUER Sanding SEALER
This Nitrocellulose sealer produces a smooth, hard, clear,
seal coat as a foundation for lacquer topcoats.
Finisher's Choice™ Sanding Sealer is light in color and high in solids.
Formulated for maximum adhesion, superior hold-out,
and exceptional flow-out properties.
Finisher's Choice™ Sealer dries within forty-five minutes and may be used
under any lacquer topcoat except the acrylics and shellacs.
5 Gallon Pails Available on Order. - Please Phone to Order.
Use Lacquer Reducer / Thinner for reduction (Not Over 15% recommended).
|
Finishers Choice CLEAR LACQUERS UPS Ground Only
Click above for Product Data Sheet & application information
Finisher's Choice™ CLEAR LACQUERS - 275 VOC compliant (Alcohol Resistant)
Mohawk’s Finisher's Choice™ clear nitrocellulose lacquers are
highly resistant to the strongest of alcohols, water, moderate heat,
abrasion, impact, and are highly scratch resistant after a week's cure time.
Finisher's Choice™ lacquer forms a hard film designed to take
punishment that would normally ruin other lacquers.
It may be used on tabletops and other applications that require a tough finish.
Finisher's Choice™ Clear Lacquers are ready to spray, high solids, low viscosity formulas that enables users to achieve the best flow and build without reduction.
Apply in light, even coats of no more than 3-4 wet mils.
Clear WW Lacquers are 275 VOC compliant. -- Solids % (wt): 20.14
|
DURACOAT Pre-Catalyzed Lacquer UPS Ground Only
DuraCoat PRE-CATALYZED LACQUER
Mohawk DuraCoat® Pre-Catalyzed Lacquers are premium quality finishes
for furniture, kitchen and bath cabinets, and for mill-work.
DuraCoat® feature high solids, moisture resistance, good flexibility,
mar resistance, with more durability than regular nitrocellulose lacquers.
When used over our vinyl sealer or high solids pre-catalyzed sealer,
DuraCoat® produces an exceptional Cabinet finishing system and passes KCMA testing.
550 VOC Compliant. -- Solids 25%.
Apply in light, even coats of no more than 3-4 wet mils. If a second coat is desired; scuff sand with 320 grit stearated sandpaper apply in light, even coats. Total film build of the entire system, including topcoats, should not exceed 4 dry mils.
Excessive build may lead to poor adhesion, cracking or cold check problems.
|
BUFFCOTEΓ΄ LACQUER (Waxing Lacquer)
Click above: Product Data Sheet & Application Information
BUFFCOTE™ LACQUER (Satin & Matte)
 Buffcote™ (aka Waxing Lacquer) contains waxes that yields dazzling results for all types of fine furniture and interior woodwork. This unique lacquer delivers a very soft look and feel that will "wow" your customers and is formulated to give a hand rubbed effect right off the spray gun.
Buffcote Lacquer is used as a Top-Coat only over Finishers Choice gloss lacquer.
The slightly amber appearance of Buffcote Lacquer also adds to the patina and richness of the wood. Buffcote offers quick dry, quick build, and exceptional flow and leveling.
Buffcote looks great over stained wood or, alone as a beautiful natural finish.
Solids: 27% --- Satin (40) & Matte (20) sheens
|
|
|
LACQUER REDUCER / THINNER 2255 UPS Only
PLEASE Click Above for Additional Information
LACQUER REDUCER - MOHAWK / Finishes Edge Lacquer Thinner 2255
A special blend of solvents formulated for thinning nitrocellulose lacquers.
Use to thin:
• Lacquer Sanding Sealer
• Vinyl Lacquer Sanding Sealer
• Mohawk Nitrocellulose Lacquers
• Classic Stringed Instrument Lacquer.
Thinner improves flow of lacquers and adjusts viscosity for the spray equipment used.
(Avoid using more than 15 % by volume of the lacquer)
Note: 5 Gallon Pails are PICK-Up or DELIVERY Only - Please Phone ahead
Information Sheet, View or Print: Solvents For Your Lacquer Finishes
|
FLASH-OFF CONTROL SOLVENT, M716-500 / FE200-014-1 UPS Only
Product Data Sheet: PLEASE Click Above
FLASH-OFF™ CONTROL SOLVENT (The Hot Weather Additive)
 Flash-Off is used to improve the flow of lacquers
and lacquer sealers without slowing the drying.
The addition of a few ounces of Flash-Off Control Solvent per gallon
of lacquer will eliminate orange-peel and over-spray roughness.
Flash-Off will improve flow and overall film smoothness.
For Use: Add 3 to 5 ounces per gallon in all Mohawk nitrocellulose,
pre-catalyzed lacquer and post-catalyzed lacquer coatings. More
may be added up to10% by volume if needed but it will increase dry time.
Do Not add to water base lacquers or conversion varnishes. (NOT for use with Shellac)
Flash Off is NOT a Blush Retarder. Blush (the white haze due to humidity in the air or moisture
in the spray line) is common in rainy or high humidity weather. To control blush, use Blush Retarder.
PLEASE View or Print : LACQUER SOLVENT Information SHEET
|
CRACKLE LACQUER UPS Ground Only
CRACKLE LACQUER
 Crackle Lacquer creates a cracked, crazed, or antique looking finish.
A wet coat of Crackle Lacquer is sprayed over a dried nitrocellulose colored base coat.
The base color shows through when the crackle layer cracks.
For example, black over white yields white visible in the cracks
and clear over white simulates an antique white enamel finish.
Effective only when a wet coat is applied with a spray gun over a
conventional gloss lacquer finish. Crackle is offered in a ready to spray consistency.
The clear can be colored with lacquer colorants to create dynamic results.
|
Rockhard TABLE TOP Urethane VARNISH UPS Ground Only
Click link for Product Data
Rockhard™ TABLE TOP Urethane VARNISH (Gloss & Satin)
 Rockhard™ Table Top Urethane Varnish
is the coating of choice when you want a hard finish
that will deliver maximum resistance to water, alcohol,
food stains, chemicals, detergents, and other damaging liquids.
Its toughness also makes Rockhard suitable for many other uses
like wooden chairs, benches, desks, dressers, chests of drawers,
vanities, bookcases, and many more.
REDUCER & for Cleaning Brushes or tools use Mineral Spirits.
|
WATERBORNE Brushing Urethane VARNISH
Please Click above for important application information
WATERBORNE Brushing Urethane VARNISH
Waterborne Brushing Varnish is a high-quality, non-yellowing acrylic/urethane top coat
that provides a beautiful finish that will enhance the beauty of wood projects.
Waterborne Brushing Varnish is low odor, fast drying, and low VOC.
It is easy to apply and has excellent leveling properties.
It is a high solids, self-sealing finish that provides a faster build with fewer coats for superior results.
 WATERBORNE Brushing Varnish Highlights:
• Urethane / Acrylic blend
• Low odor • 275 VOC
• Easy to use
• Can be brushed or spray applied
• High Solids: 28%
• Excellent leveling properties!
• M603-21606 -- Semi-Gloss (Sealer & build coats)
• M603-21406 -- Satin • M603-21206 -- Flatt
Note: Click Here for the Original oil/solvent based ROCKHARD TABLETOP VARNISH
|
Arm-R-Seal Oil Based Urethane Topcoat
Click Above for Data & Application Information
ARM-R-SEAL Oil Based Urethane Interior Topcoat
Arm-R-Seal topcoats are made with only the highest quality urethane resins,
making them extremely hard, durable, and long lasting.
Traditional Warm Amber Tone.
Application: Brush, Roller, or Spray.
Available Sheens: Gloss, Semi-Gloss, Satin
Coverage: Quart, 100 Sq. Ft. -- Gallon, 400 Sq. Ft.
|
SALAD BOWL FINISH CLEAR UPS Ground Only
Click above for Application Information
SALAD BOWL FINISH Clear Click For: Printer Friendly Application Information / Data Sheet
Mohawk, Behlen Salad Bowl Finish is specially formulated to allow the
following statement. "This product contains FDA regulated ingredients
complying with 21 CFR 175.300." and therefore achieves a non-toxic,
safe for food contact (in its cured state) finish. Salad Bowl Finish has the
application ease of an oil finish (use a clean white cloth) and the film building
and sheen producing (up to a satin) qualities of a varnish.
Wooden bowls, wooden utensils, butcher block counters when finished
with Salad Bowl Finish may be used in contact with foods.
Child safe for use on toys, recreational objects (games, puzzles), and infant furniture.
(NOT intended for use on cutting boards or chopping blocks)
|
|
|
|
|
Aerosol, FINISHERS CHOICE CLEAR Lacquers UPS Ground Only
for More Information: Click Above
FINISHER'S CHOICE CLEAR LACQUER Aerosols
 FINISHER'S CHOICE™ lacquers are water-resistant, high-solids nitrocellulose lacquer.
'Top Coats' are a higher solids lacquer for use on bare wood or to build finish thickness.
FINISHER'S CHOICE™ lacquers and sealer perform like a spray gun applied finish.
Use these aerosols when applying a new finish to bare wood, or on bare wood
spot repairs when rubbing out will be necessary.
Finisher's Choice aerosols are compatible with solvent base dyes, stains,
and other Mohawk aerosol lacquers.
For a Dead Flatt sheen, build finish with Finisher's Choice Gloss for clarity and
then apply a final coat or two of the Tone Finish Clear DEAD FLATT.
For Touch-Up, and to blend Lacquers into the surrounding finish, use the Tone Finish Clear Aerosols.
|
Aerosol, 'Tone Finish' CLEAR LACQUERS
Please See Aerosol Application Tips (Click Above)
Tone Finish CLEAR LACQUER Aerosols
Clear Nitrocellulose based Lacquers are recommended as topcoats for wood grain finishes.
Use for the touch-up and repair of existing furniture and cabinet finishes.
The lower 'Tone Finish' solids seal, protect, and provide the correct
sheen adjustment to repaired areas.
Tone Finish Clears are formulated to adjust repairs to the correct sheen
and to blend well into existing finishes.
For bare or stripped surfaces or to build a finish, the higher solids
FINISHER'S CHOICE™Top Coat aerosol lacquers are recommended.
|
|
|
Aerosol, PRE-CATALYZED CLEAR LACQUERS UPS Ground Only
Click link above for More Info
PRE-CAT Clear LACQUERS
 Pre-Cat lacquers feature excellent flow out for touch-up use.
The dry film is very durable and adheres where other finishes will not.
• Excels in flow-out, adhesion and hold-out.
• Fast-drying, resistant to yellowing.
• Leaves no halo on spot repairs.
• Very Good clarity and durability
Pre-Cat Lacquer aerosols have been tested and approved
for furniture factory touch-up on pre-catalyzed finishes.
An excellent choice for Kitchen and Bath cabinets.
|
Aerosols, WATER CLEAR ACRYLIC LACQUERS UPS Ground Only
Click above for more info
WATER CLEAR Acrylic LACQUER Aerosols
Acrylic coatings are crystal clear and non-yellowing.
Acrylic Lacquer is a water clear protective coating for furniture,
paper and plastic products.
Clear Acrylic lacquers may be sprayed on almost any surface (wood, metals, etc.).
Acrylic aerosols are compatible with Behlen & Mohawk touch-up products.
When a clear finish is needed over whites, bright colors, or light wood tones,
to retain clarity and color a Water Clear Acrylic is the answer.
Available: Gloss - Satin - Flatt
|
|
|
|
|
|
|
|
