|
|
Finisher's SHADING GLAZING STAINS UPS Ground Only
Important: Click above for Application Information
Mohawk SHADING & GLAZING STAIN
 FINISHERS GLAZE™ SHADING & GLAZING STAINS are
a special blend of concentrated colorants and topcoat friendly resins
(to ensure good adhesion between sealing and finishing coats)
in a medium viscosity base.
The formula allows the finisher to create unique toning
and highlight effects over almost any sealed surface.
Compatible for use with conventional and modern catalyzed finishes
as well as conversion varnishes and urethanes.
Use on a sealed surface, when using as a glaze.
View or Print PDF Glaze Application Informaton
Concentrate colors are shown for comparison only, color rendering subject to computer monitor limitations.
 Raw Umber
M504-01436
|
 Burnt Umber
M504-14356
|
 Black
M504-2246
|
 Raw Sienna
M504-4776
|
 Burnt Sienna
M504-4766
|
 Van Dyck Brown
M504-14786
|
 Dk Rd Mahogany
M504-2276 |
|
AQUA COAT CLEAR Wood Grain & Pore FILLER
Click above for Application and Use Directions
AQUA COAT Clear Wood Grain & Pore Filler
 Easy-to-sand clear gel wood grain filler for filling the grain and pores
in woods (such as oaks, ash, and hard-to-fill woods).
Aqua Coat Clear Grain Filler is a completely transparent paste filler.
The slick paste goes on easily, scrapes off cleanly, and dries clear for a
glass smooth guitar or piano style finish. Clear Grain Filler is ideal for
filling grain & pores without adding color to the wood.
Used by:
• Furniture Crafters
• Luthiers / Guitar Makers
• Gun Stock Finishers
• Piano Restoration
• Furniture Refinishing
• Cabinet Makers & Re-finishers
Aqua Coat Wood Grain & Pore Filler is the ideal CLEAR filler on:
• Tabletops • Pianos • Cabinets • Guitars and Wood Instruments
 Clear Wood Grain Filler Advantages
• Crystal Clear when dry
• Grain Filler dries in 30-45 minutes for a faster build
• Easy sanding • Minimal shrinkage
• Low odor and low VOC • Non-flammable
• Tint with water-soluble colorants or dyes • Thin with water • Water clean-up
"For a clear glass smooth finish, use Aqua Coat Wood Grain & Pore Filler to maintain the color, clarity,
and beauty of the wood. It works better and faster than trying to fill the grain or pores with coats of finish."
See: PRODUCT DESCRIPTION & RECOMMENDED USES
|
|
|
MINERAL SPIRITS UPS Only
MINERAL SPIRITS
Mineral Spirits are a petroleum distillate;
used for reducing oil base color concentrates,
stains, and varnishes.
5 Gallon Pails Pick-Up or Delivery Only,
To Place Order, Phone 877-245-5611
|
WOOD GRAIN FILLERS UPS Ground Only
WOOD GRAIN FILLER (Paste Wood Filler)
 A classic Solvent based formula, compatible with almost all sealers and topcoats.
Mohawk Grain Filler is used for filling open grained woods.
A fine blended mixture of silica, pigments, provides a smooth,
glass-like surface for subsequent finishing coats.
Must be thinned with Filler Reducer (depending on the wood grain) for use.
Finer grained woods will require a thinner mix than more open grained species.
Use over a wash coat of sealer. Tint or tone with oil colorants.
••• Our Grain Filler Scraper / Leveler is advised for even filling.
A 24-hour dry time is necessary before top-coating.
In general, a ratio of 4 parts Grain Filler to 1 part Reducer is recommended. - Quart Cans
 Natural
M608-4206
|
Med Brn Walnut
M608-4226 |
 Mahogany
M608-4236 |
 Black
M608-4216 |
Please See: Grain Filler Instructions: Printer Friendly PDF file
|
WATER BASED Paste Wood Filler / GRAIN FILLER
Water Base Grain Filler
 Mohawk Water Base Grain Filler has been designed to create a professional smooth,
closed grain surface on open grain woods like oak, mahogany and cherry.
It applies easily, levels smoothly, dries quickly (usually in 2 to 3 hours), excellent
for filling end grain, and sands to a finishing grit smoothness.
Accepts any waterborne or solvent base stain or finish.
Allow overnight dry time if using solvent base stains and finishes.
Mohawk Water Base Paste Wood Grain Filler is environmentally friendly.
It is low in VOC’s, nonflammable, and cleans up with warm water and detergents.
Use waterborne or UTC pigments to make additional color tones. -- Quarts.
|
|
|
Rockhard TABLE TOP Urethane VARNISH UPS Ground Only
Click link for Product Data
Rockhard™ TABLE TOP Urethane VARNISH (Gloss & Satin)
 Rockhard™ Table Top Urethane Varnish
is the coating of choice when you want a hard finish
that will deliver maximum resistance to water, alcohol,
food stains, chemicals, detergents, and other damaging liquids.
Its toughness also makes Rockhard suitable for many other uses
like wooden chairs, benches, desks, dressers, chests of drawers,
vanities, bookcases, and many more.
REDUCER & for Cleaning Brushes or tools use Mineral Spirits.
|
WATERBORNE Brushing Urethane VARNISH
Please Click above for important application information
WATERBORNE Brushing Urethane VARNISH
Waterborne Brushing Varnish is a high-quality, non-yellowing acrylic/urethane top coat
that provides a beautiful finish that will enhance the beauty of wood projects.
Waterborne Brushing Varnish is low odor, fast drying, and low VOC.
It is easy to apply and has excellent leveling properties.
It is a high solids, self-sealing finish that provides a faster build with fewer coats for superior results.
 WATERBORNE Brushing Varnish Highlights:
• Urethane / Acrylic blend
• Low odor • 275 VOC
• Easy to use
• Can be brushed or spray applied
• High Solids: 28%
• Excellent leveling properties!
• M603-21606 -- Semi-Gloss (Sealer & build coats)
• M603-21406 -- Satin • M603-21206 -- Flatt
Note: Click Here for the Original oil/solvent based ROCKHARD TABLETOP VARNISH
|
SALAD BOWL FINISH CLEAR UPS Ground Only
Click above for Application Information
SALAD BOWL FINISH Clear Click For: Printer Friendly Application Information / Data Sheet
Mohawk, Behlen Salad Bowl Finish is specially formulated to allow the
following statement. "This product contains FDA regulated ingredients
complying with 21 CFR 175.300." and therefore achieves a non-toxic,
safe for food contact (in its cured state) finish. Salad Bowl Finish has the
application ease of an oil finish (use a clean white cloth) and the film building
and sheen producing (up to a satin) qualities of a varnish.
Wooden bowls, wooden utensils, butcher block counters when finished
with Salad Bowl Finish may be used in contact with foods.
Child safe for use on toys, recreational objects (games, puzzles), and infant furniture.
(NOT intended for use on cutting boards or chopping blocks)
|
WAX WASH Cleaner & WAX REMOVER UPS Only
To: Info & Label Text
WAX WASH DE-WAXER WOOD CLEANER
 WAX WASH / De-Waxer Wood & Finish CLEANER
& WAX REMOVER is a specially formulated blend of solvents.
For best repair and rub-out results, first prepare and clean the surfaces with
WAX WASH / De-Waxer to remove waxes, oil and other foreign material
from bare woods, new finishes, and aged wood finishes.
Wax deposits that remain after the use of paint, lacquer, and varnish removers
can be eliminated with use of WAX WASH / De-Waxer
Available: Quart M712-1906 & Aerosol M107-0190
|
POUR-N-WIPE / Master Gel FINISH UPS Only
Click above for Label Text & Product Data
POUR-N-WIPE FINISH (M603-3016) / Behlen Master Gel (B550-30016)
A (solvent / oil based) top coat for bare, dyed or stained wood.
• Unique gel form • Easy-to-apply • No mess, no brush marks
• Pour-N-Wipe® Finish is self sealing • Excellent as a wood turning finish.
Pour-N-Wipe is self-sealing (no sealer coat is required) and virtually colorless when dry.
Imparts a lustrous satin urethane finish to wood, protecting against water and alcohol staining.
Clean up: Mineral Spirit.
Pour-N-Wipe is durable enough for use on hardwood floors, bar and table tops.
Pour-N-Wipe Finish can be applied with a lint free cloth.
Dries overnight. Allow to dry 4 hours prior to re-coating.
For Best Results: The work area, surface being finished, Pour-N-Wipe should be above 60°f
Maintain 60 degrees throughout the dry time of the coats.
Colder temperature can affect flow and dry times.
|
FNISH UP Polyurethane
Click above for Data & Application Information
FNISH-UP™ Wipe-On Polyurethane (Waterborne Wipe On)
Finish Up is a waterborne (WATER CLEAR) user friendly wipe on finish.
Mohawk Finish-Up™ Polyurethane can be applied over repairs such as
Burn-Ins, Fil-Stik® Putty Stick fills, Blendal® Powders and Touch Up
Markers to seal in the repair, leaving a durable protective finish.
Apply over properly cleaned existing finishes to improve appearance
and durability. Finish-Up™ Polyurethane adheres well to most types of lacquers,
vinyl clads, and high pressure laminates as well as many other substrates.
Best of all, it is water based and has almost no odor.
The almost no odor feature makes Finish-Up™ Polyurethane the product of choice
where aerosols and other solvent based touch up finishes are not appropriate.
• Low VOC 380 g/l • Easy Wipe On application • Quick Drying • Good Flow characteristics • Good Durability
• Moisture & Alcohol Resistant • Water Clear • Excellent Adhesion • Won't Lift other finishes • Nonflammable
|
|
|
|
|
|
|
|
|
|
|
SealCoat Universal Sanding SEALER (Shellac) UPS Ground Only
Click above for Product Data
SealCoat™ Universal Sanding Sealer
 SealCoat offers the time-saving versatility of a
refined Dewaxed Shellac in a pre-mixed 2 lb. cut 100% wax-free formula.
It’s the perfect sanding sealer because it penetrates the surface, dries quickly,
gives a rich tone to wood surfaces and since it contains no waxes or stearates.
SealCoat is guaranteed to be compatible with oil-base polyurethanes,
acrylic finishes, lacquers, catalyzed finishes, and varnishes.
SealCoat™ won't raise the grain and dries quickly.
|
E-Z VINYL Lacquer SEALERS - CLEAR, BLACK & WHITE UPS Ground Only
Click link above for Data Sheet
E-Z VINYL LACQUER SEALERS - CLEAR, BLACK & WHITE
VINYL SEALERS develop an excellent moisture resistant barrier for the wood substrate, and provides a good tough, and flexible base for all lacquer finishes.
Vinyl Sealer is offered in a ready to use formulation
that needs no further reduction or catalyst.
• • • 5 Gallon Pails available on Order. Please Phone to order.
Note: Vinyl Sealer may be applied over raw wood or filled and stained substrates.
Clear also available for Aerosol applications
|
CAB/ACRYLIC CLEAR TOPCOAT Lacquer
CAB/Acrylic CLEAR TOPCOAT
 Mohawk CAB (Cellulose Acetate Butyrate) Acrylic Topcoat
is a 275 VOC maximum compliant, self-sealing coating that provides a clear,
non-yellowing film that is perfect to topcoat interior wood surfaces.
It is the best choice for light colored stains and may be applied
over pigmented lacquer colors because it does not yellow with age.
• Passes KCMA standard testing and works great on cabinets
• Will not yellow or amber
• No re-coat window or pot life
• No mixing or reduction necessary • Fast drying
|
Finishers Choice LACQUER SANDING SEALER UPS Only
Finisher's Choice™ LACQUER Sanding SEALER
This Nitrocellulose sealer produces a smooth, hard, clear,
seal coat as a foundation for lacquer topcoats.
Finisher's Choice™ Sanding Sealer is light in color and high in solids.
Formulated for maximum adhesion, superior hold-out,
and exceptional flow-out properties.
Finisher's Choice™ Sealer dries within forty-five minutes and may be used
under any lacquer topcoat except the acrylics and shellacs.
5 Gallon Pails Available on Order. - Please Phone to Order.
Use Lacquer Reducer / Thinner for reduction (Not Over 15% recommended).
|
Finishers Choice CLEAR LACQUERS UPS Ground Only
Click above for Product Data Sheet & application information
Finisher's Choice™ CLEAR LACQUERS - 275 VOC compliant (Alcohol Resistant)
Mohawk’s Finisher's Choice™ clear nitrocellulose lacquers are
highly resistant to the strongest of alcohols, water, moderate heat,
abrasion, impact, and are highly scratch resistant after a week's cure time.
Finisher's Choice™ lacquer forms a hard film designed to take
punishment that would normally ruin other lacquers.
It may be used on tabletops and other applications that require a tough finish.
Finisher's Choice™ Clear Lacquers are ready to spray, high solids, low viscosity formulas that enables users to achieve the best flow and build without reduction.
Apply in light, even coats of no more than 3-4 wet mils.
Clear WW Lacquers are 275 VOC compliant. -- Solids % (wt): 20.14
|
DURACOAT Pre-Catalyzed Lacquer UPS Ground Only
DuraCoat PRE-CATALYZED LACQUER
Mohawk DuraCoat® Pre-Catalyzed Lacquers are premium quality finishes
for furniture, kitchen and bath cabinets, and for mill-work.
DuraCoat® feature high solids, moisture resistance, good flexibility,
mar resistance, with more durability than regular nitrocellulose lacquers.
When used over our vinyl sealer or high solids pre-catalyzed sealer,
DuraCoat® produces an exceptional Cabinet finishing system and passes KCMA testing.
550 VOC Compliant. -- Solids 25%.
Apply in light, even coats of no more than 3-4 wet mils. If a second coat is desired; scuff sand with 320 grit stearated sandpaper apply in light, even coats. Total film build of the entire system, including topcoats, should not exceed 4 dry mils.
Excessive build may lead to poor adhesion, cracking or cold check problems.
|
BUFFCOTEΓ΄ LACQUER (Waxing Lacquer)
Click above: Product Data Sheet & Application Information
BUFFCOTE™ LACQUER (Satin & Matte)
 Buffcote™ (aka Waxing Lacquer) contains waxes that yields dazzling results for all types of fine furniture and interior woodwork. This unique lacquer delivers a very soft look and feel that will "wow" your customers and is formulated to give a hand rubbed effect right off the spray gun.
Buffcote Lacquer is used as a Top-Coat only over Finishers Choice gloss lacquer.
The slightly amber appearance of Buffcote Lacquer also adds to the patina and richness of the wood. Buffcote offers quick dry, quick build, and exceptional flow and leveling.
Buffcote looks great over stained wood or, alone as a beautiful natural finish.
Solids: 27% --- Satin (40) & Matte (20) sheens
|
CRACKLE LACQUER UPS Ground Only
CRACKLE LACQUER
 Crackle Lacquer creates a cracked, crazed, or antique looking finish.
A wet coat of Crackle Lacquer is sprayed over a dried nitrocellulose colored base coat.
The base color shows through when the crackle layer cracks.
For example, black over white yields white visible in the cracks
and clear over white simulates an antique white enamel finish.
Effective only when a wet coat is applied with a spray gun over a
conventional gloss lacquer finish. Crackle is offered in a ready to spray consistency.
The clear can be colored with lacquer colorants to create dynamic results.
|
|
