Finishing Products
Product Data Sheet
Buffcote™ Lacquer
M614-320 (20 Sheen), M614-340 (40 Sheen)
Available: 1 gallon & 5 gallon
Product Description:
Buffcote™ Lacquer contains waxes that provide dazzling results for all types of fine furniture and interior woodwork. This unique lacquer delivers a very soft look and feel that will “wow” your customers and is formulated to give a hand rubbed effect right off the spray gun. The slightly amber appearance of Buffcote™ Lacquer also adds to the patina of the wood. Buffcote™ Lacquer
offers quick dry and quick build along with exceptional flow and leveling.
Buffcote™ Lacquer looks great over stained wood or as a beautiful natural finish.
Advantages:
1. Quick dry and build
2. Exceptional flow and leveling
3. Looks great over stained wood or as a natural finish
4. Conventional VOC formulation
5. 27% solids by weight
6. Perfect for interior furniture or antiques or architectural woodwork
7. Ready to spray in Satin and Matte sheens
Characteristics:
Weight per gallon: 7.53 lbs/gal
Solids % (wt): 26.67 – 27.3
Solids % (vol): 20.02 – 20.67
Package viscosity: 19 – 21 seconds, # 4 Ford cup
Dry time: Air dry @ 77 F, 50% relative humidity
To touch: 7 minutes
To handle: 15 minutes
To recoat: 60 minutes
To rubout or package: 24 hours
VOC’s (coating): 5.5 lbs/gal (655.84 – 661.22 g/l)
VOC’s (material): 5.5 lbs/gal (655.84 – 661.22 g/l)
VHAP’s: .52 - .54 lbs VHAP’s/lb solids
Package life: 3 years
Spread rate: 322 sq ft / gal @ 1 dry mil
Sheen: Satin: 40
Matte: 20
(Contains nitrocellulose resins, which tend to amber in color over time
but does not affect coating performance)
All values theoretical; not intended to be exact QC specifications.
HMIS: Health – 2, Flammability – 3, Reactivity – 0, Personal Protection - X
Directions:
Stir thoroughly before using. Seal with a full wet coat of Finisher’s Choice™ Clear Lacquer Sealer (M610-2500), E-Z Vinyl® Sealer (M610-800) or E-Z Vinyl® Medium Solids Sealer (M610-801) and allow to dry for 30-45 minutes. Sand thoroughly with 320 grit stearated sandpaper, and remove dust before topcoat application. Apply Buffcote™ (M614-3XX) in light, even coats of no more than 3-4 wet mils. If a second coat is desired; scuff sand with 320 grit stearated sandpaper apply in light, even coats. Total film build of the entire system, including topcoats, should not exceed 4 dry mils.
Excessive build may lead to poor adhesion, cracking or cold check problems.
If sanding between coats is desired, use 240 or finer grit paper and remove dust before topcoating.
If finish is to be rubbed, 3 coats may be necessary.
