Rockhard™ Waterborne Brushing Varnish
Rockhard™ Waterborne Brushing Varnish is a high-quality, non-yellowing acrylic/urethane
top coat that provides a beautiful finish that will enhance the beauty of your wood projects.
Rockhard™ Waterborne Brushing Varnish is low odor, fast drying, and low VOC, it is easy to apply
and has excellent leveling properties. Rockhard is a high-solids, self-sealing finish that provides a
faster build with fewer coats for superior results. Can be brushed or spray-applied.
Available in: Flat, Satin, and Semi-Gloss sheens.
DIRECTIONS:
Stir thoroughly to mix. Do not shake. Sand raw wood with 180 grit sandpaper and remove dust.
If stained, allow it to dry completely. Apply Rockhard™ Waterborne Brushing Varnish
with a high-quality synthetic bristle brush or sponge brush in even uniform coats.
Brush in the direction of the wood grain when possible.
Overlap each stroke and allow the material to flow. Do not overbrush.
Allow each coat to dry a minimum of 1 hour before recoating or longer in cool and humid conditions.
Recoat Instruction:
Scuff sand between all coats using 320 grit stearated sandpaper and remove sanding dust
for proper bonding and adhesion. Apply a minimum of 3 coats over new wood.
Allow the final coat to dry a minimum of 3 days before subjecting the finish to normal use.
If the finish is to be sanded and rubbed additional coats may be required.
Dry a minimum of one week before rubbing finish.
CLEANUP: Warm soapy water
|
